Pro-Cart AT1

All-Terrain Countertop Installation Cart

Don't settle for cheap imitations, get the original, made in the USA!

The Pro-Cart AT1 provides a solution to the challenges associated with large and cumbersome countertop installation carts. The cart is constructed from aluminum tubing, so it is strong and lightweight at less than 50 pounds. Important for climbing stairs, the cart stays attached to the countertop when lifted and the 8” casters allow resting on stair treads. Pneumatic casters dampen vibrations and enable travel across rough terrain such as gravel or lawns. The wheelbase makes the cart very stable, even with large tops, and the cart’s high ground-clearance allows “popping of wheelies” over larger curbs. In many cases, one person can push and maneuver the cart by themselves. Tops are secured by clamps located on each side of the cutout to reduce breakage in the middle. The optional upgrade kit enables the cart to be folded for easy storage (reduces cart width to only 9”). The package weight and dimensions allow shipping via UPS, which avoids costly freight charges. All Omni Cubed products are engineered, manufactured, and assembled in the USA and are covered by a one-year manufacturer’s limited warranty.

Max Clamp Opening: 59mm (2.32")
Weight Capacity: 750 lbs









Pro-Cart AT1
Code: PCAT1



Pro-Cart AT1 Folding Kit
Code: PCAT1-FK



Multi-Top Accessory
Code: PCAT1-MTA







The Cart Folding Upgrade Kit allows the casters to be rotated inline with the main support rail. (See photos below.)


Unfolded


It just takes seconds to pivot the legs under the cart.


Folded


The Cart Folding Upgrade Kit allows the cart to fit in tight spaces for storage.


The cart stays on steps without having to hold it.


Workers can rest on stairs then easily pick up the stone again.










Here is a short video of our Pro-Cart AT1 in the snow with our "slab-cam" attached.



Testimonials


The Pro-Cart is absolutely the best thing we've ever bought for heavy quartz tops. We can clamp monster pieces onto this thing, roll em right down the ramp out of the truck, (no ground clearance issues even with long tops), across the yard if need be, up 1-2 steps without really lifting, cross thresholds etc. 52" x 118" island last week (~700#). No issues, very safe installation.

Matt Kraft
Custom Marble, Inc.
Millstadt, IL


I wasn’t sure about the Pro-Cart cart at first because it's so different from the carts we have already, but we decided to give it a try, and what a surprise! We have had pieces in it that were 72x112 inches and it was still remarkably stable. We like how the cart attaches directly to the stone allowing you to maneuver the pieces up stairs with a lot less effort and with only two men. We just finished a 16 unit condo (with a lot of stairs) and your cart was amazing. Thanks!

Bill Cassell, President
Innovative Stone Solutions
Mansfield, MO


My install crews love this cart!
They call it the NASA ('cause it’s like a rocket for installation) go figure! Another thing they really like is how much it helps taking large pieces up or down stairs. Anyway, they use it all the time and it makes getting the stone into the house way faster and safer with fewer guys, and that saves me money! Thanks!

Diko Chekian, CEO/CFO
Prestige SurfaceWorks
Fresno, CA


Just wanted to let you know this cart is fantastic! My install crews were skeptical at first because of the light weight and compact design. I wish you could have heard them when we had a large piece to go in a residence. They were amazed at how it stayed in place when going up steps. Now they won't even consider using our other carts. Thanks for making their job easier. I highly recommend that every install crew have your Pro-Cart.

Chip Carnevale, President
Pietra Naturale Inc.
Centerville, OH


I just want to tell you that I have 25+ years in the stone industry. I first bought the sink hole saver, it saved many tops in the first year. I then purchased the Seam Setter VC2, I have used many seam setters but this one is the best! I just received my Pro Cart and it worked great in the mud and snow. With your great products and great customer service I will buy more of your products in the future. I take great pride in my work and it is nice to see other people take pride in theirs. I like to be the best in my business and using your products makes it easier for me.

Paul Turowski
Keystone Granite
Pittsburgh, PA


We investigated using the Pro-Cart to help us transport a very intricate 3cm granite island (approx. size 72" x 118") into a home in the $3MM range. After talking to the Omni Cubed engineer, we made the decision to purchase the cart, even though the weight of the island was in excess of the rating on the cart. The cart performed flawlessly. In addition, we left the cart attached to the island top during the entire installation process. The only lifting (by hand and 8 men) was to transfer the island top from an A-frame on a trailer to the cart. The Pro-Cart made a potentially dangerous and difficult installation relatively easy. I would highly recommend this cart.

Jeff Bognar
Granite, Marble, and Tile Solutions, LLC
Ankeny, IA


If you own an Omni Cubed product, we would love to here from you. customerservice@omnicubed.com
We always appreciate feedback from the fabricator using our tools!






Specifications



Pro-Cart AT1
Mfg. Part # PCAT1
Product Dimensions 20”W x 60”L x 20” H
Product Weight 49 lb
Packaged Weight 60 lb
Packaged Size (Box) 10” x 10” x 60” (ships UPS)
Rated Capacity Rated Capacity
Max. Opening (Clamp) 69 mm (2.7 in.)
Other specs 15.5” from support rail surface to the ground; 45" between clamp uprights; 60" length of support rail; 18.5" width at outside of tires (20" total width at height of caster support rails)
Materials Square tube aluminum framework; machined billet aluminum tightening handles; stainless steel clamp shafts; PVC clamping pads; hard rubber padding strips on support rail; stainless steel and zinc plated steel hardware; 8” pneumatic casters

Pro-Cart AT1 Folding Kit
Mfg. Part # PCAT1-FK
Cart Dimensions Comparison 20”W x 60”L x 20” H (before folding)
with and without use of folding kit 10”W x 60”L x 20” H (after folding)
Product Weight (kit only) 1.6 lb
Packaged Weight (kit only) 2.8 lb
Packaged Size (Box) 6” x 6” x 4”
Rated Capacity Same as cart without folding kit- 750 lb.
Materials Machined billet aluminum tightening handles and conversion plates; stainless steel pivot shafts; PVC spacers; stainless steel and zinc plated steel hardware

Pro-Cart AT1 Multi-Top Accessory
Mfg. Part # PCAT1-MTA (sold in pairs)
Product Dimensions 9”W x 9”L x 28” H (each)
Product Weight 5.13 lb (each); 10.3 (pair)
Packaged Weight 12.5 lb (pair in box)
Packaged Size (Box) 30” x 10” x 10”
Rated Capacity 750 lb (same as Pro-Cart AT1)
Materials Square tube aluminum framework; hard rubber padding strips on support rails

Home  |  Contact  |  About  |  Terms and Conditions  |  Privacy  |  Warranty  |  Distributor Pages  |  877.311.1976
Copyright © 2009 Omni Cubed, Inc.  |  All rights reserved worldwide.